Playing From A Car Audio Unit; Additional Information; Precautions - Sony XDP-PK1000 Operating Instructions Manual

1
Press the SOURCE/OFF button on the
cradle or the remote commander
repeatedly until the LED indicator on
the cradle turns red (page 6).
Tip
• If you set an iPod/iPhone on the cradle
when the system is on, the iPod/iPhone is
selected as the source. If the iPod/iPhone is
in play mode when you set it on the cradle,
the music/video on the iPod/iPhone will
automatically play back.
2
Play back music on the iPod/iPhone.
3
Adjust the volume with the remote
commander or the cradle.
4
Adjust the sound characteristics by
pressing the buttons on the remote
commander.
For details on sound settings, see
page 11.
Playing from a car audio
unit
You can play music, etc., from your car
audio unit via this system.
1
Press the SOURCE/OFF button on the
cradle or the remote commander
repeatedly until the LED indicator on
the cradle turns blue (page 6).
2
Turn on your car audio unit and select
the source you want to play.
3
Adjust the volume by the car audio unit
itself.
Notes
• Do not turn off the system when the car audio
unit is turned on. If you fail to do so, the system
could malfunction.
• Adjust the volume by the car audio unit itself.
You cannot adjust the volume by the system's
remote commander/cradle when the car audio
unit is selected as the source.
Additional
Information

Precautions

• If your car is parked in direct sunlight and
there is a considerable rise in temperature
inside the car, allow the system to cool down
before use.
• Do not use the system on a weak battery as
its optimum performance depends on a good
power supply.
• For safety reasons, keep your car audio unit
and iPod/iPhone volume moderate so that
you can still hear sounds outside your car.
• If you have any questions or problems
concerning the system that are not covered
in this manual, please consult your nearest
Sony dealer.
Fuse replacement for the amplifier and
the DSP master unit
If a fuse blows, check the power connection
and replace the fuse. If the fuse blows again
after replacement, there may be an internal
malfunction. In such a case, consult your
nearest Sony dealer.
Warning
When replacing the fuse, be sure to use one
matching the amperage stated above the fuse
holder. Never use a fuse with an amperage rating
exceeding the one supplied with the system as
this could damage the system.
Note
• Use an appropriate tool to replace a fuse.
19