Playback; Precautions; Setting Up The System; Enjoying An Ipod/Iphone - Sony XDP-MU110 Operating Instructions Manual

Playback

Precautions

• For safety reasons, keep your car audio unit
and iPod/iPhone volume moderate so that
you can still hear sounds outside your car.
• Do not watch an iPod/iPhone while driving.
It is dangerous and may cause a traffic
accident. If you need to operate the iPod/
iPhone or the cradle, or take a phone call, be
sure to stop your car in a safe place before
operating the iPod/iPhone or the cradle or
taking a phone call.
• An iPod/iPhone's Screen Rotation function
may work on rare occasions, which changes
the display to the landscape/portrait mode
unexpectedly.

Setting up the system

Follow the steps below when using the
system for the first time.
1
When the system is turned on, press
the RESET button on the DSP master
unit (page 5).
2
Make sure that the LED indicators on
the DSP master unit and the cradle are
lit.
3
Set the sound setting switches
according to your vehicle (page 8).

Enjoying an iPod/iPhone

You can enjoy the music of an iPod/iPhone
via the system.
Note
• If the battery of the iPod/iPhone is extremely
low, charge it for a while before operation.
1
Press the SOURCE/OFF button on the
cradle or the remote commander
repeatedly until the LED indicator on
the cradle turns red (page 6).
Tip
• If you set an iPod/iPhone on the cradle
when the system is on, the iPod/iPhone is
selected as the source. If the iPod/iPhone is
in play mode when you set it on the cradle,
the music/video on the iPod/iPhone will
automatically play back.
2
Play back music on the iPod/iPhone.
3
Adjust the volume with the remote
commander or the cradle.
4
Adjust the sound characteristics by
pressing the buttons on the remote
commander.
For details on sound settings, see
page 9.
Playing from a car audio
unit
You can play music, etc., from your car
audio unit via this system.
1
Press the SOURCE/OFF button on the
cradle or the remote commander
repeatedly until the LED indicator on
the cradle turns blue (page 6).
2
Turn on your car audio unit and select
the source you want to play.
3
Adjust the volume by the car audio unit
itself.
Notes
• Do not turn off the system when the car audio
unit is turned on. If you fail to do so, the system
could malfunction.
• Adjust the volume by the car audio unit itself.
You cannot adjust the volume by the system's
remote commander/cradle when the car audio
unit is selected as the source.
17