LG LCV5300R-BN Owner's Manual page 2

Installation
Using the template as a guide, make a hole through the ceiling.
1.
Install the camera mounting bracket to the ceiling.
2.
Operation
OSD Menu control buttons
This camera utilizes an on-screen user MENU. To set items on the menu, use the
following buttons.
DOWN
LEFT
SET
RIGHT
UP
BUTTON Description
UP Used to move upper direction on the menu screen. Use this
button to select an item or adjust the parameters.
DOWN Used to move lower direction on the menu screen. Use this
button to select an item or adjust the parameters.
RIGHT Moves the cursor to the right. Used to increment the value
selected in the menu. The parameter changes each time this
button is pressed.
LEFT Moves the cursor to the left. Used to decrement the value
selected in the menu. The parameter changes each time this
button is pressed.
SET Executes selections and displays a submenu for an item with
the mark.
Connect the cables to the cable jacks of the camera body.
3.
Assemble the camera and mounting bracket as illustrated step
4.
a and b.
a b
Exposure Settings
You can set the exposure options using the
EXPOSURE menu.
1. Select [EXPOSURE] option on the [CAMERA
SETTING] menu.
2. Use [LEFT] or [RIGHT] button to select a mode.
3. Press [SET] button and the EXPOSURE menu
appears.
NOTE:
Set the Shutter OFF when Color Rolling occurs in
the indoor scene. Recommend the Shutter Auto in
the outdoor scene.
White Balance settings
FAR
NEAR
Select the method by which the camera shifts its
output colors to compensate for the color of a light
source.
1. Select [WHITE BAL] option.
2. Use [LEFT] or [RIGHT] button to select a mode
then press [SET].
Day/Night Setting
1. Select [DAY/NIGHT] option.
2. Use [LEFT] or [RIGHT] button to select mode for
Day/Night function.
NOTE:
If you set the AGC to [OFF] on the [EXPOSURE] menu,
the AUTO mode of the DAY/NIGHT function is not
available and [---] mark is displayed.
Camera Adjustment
Connect a portable monitor to the video jack.
1.
FAR
NEAR
Adjust the Pan/Tilt/Rotate position of the camera.
2.
TILT
TILT
ROTATE
PAN
FAR NEAR
SmartIR Setting
SettingSmartIR function improve the sensitivity in
the low luminance. SmartIR analyze the image of
the screen, when a subject is close. Then SmartIR
reduce the IR LED brightness and gain to prevent
saturation of the closed subject.
1. Select [SmartIR] option.
2. Use [UP] or [DOWN] to select an option then
use [LEFT] or [RIGHT] button to adjust the
option.
Motion Detection Setting
The motion detection detects the
moving objects in the scene by monitoring changes
in brightness level. You can select the level of
TELE WIDE
sensitivity for motion detection to 8 zone.
1. Select [MOTION DET] option.
2. Use [LEFT] or [RIGHT] button to select a [ON]
and press [SET]. The MOTION DETECTION menu
appears.
3D-DNR Setting
1. Select [3D-DNR] option. If pictures are not clear
due to brightness, this option would reduce the
noise of picture.
2. Use [LEFT] or [RIGHT] button to select a value.
Adjust the zoom.
3.
TILT
TILT
WIDE
TELE
ROTATE
PAN
NOTE:
Disassemble the IR cover as illustrated
in case of difficult occasion to adjust the
zoom lever.
Adjust the focus.
4.
FAR NEAR
NOTE:
Disassemble the IR cover as illustrated
in case of difficult occasion to adjust the
focus lever.
TELE WIDE
Privacy Mask Setting
This function is aiming at the protection of personal
privacy, selecting a screen part black not to be
displayed in the screen. Up to 8 zones can be
registered.
1. Select [PRIVACY] option.
2. Use [LEFT] or [RIGHT] button to select a [ON]
and press [SET]. The PRIVACY SETUP menu
appears.
NOTE:
You can adjust the mask color manually except for COLOR 8.
Special Menu Settings
This menu lets you adjust and set up D-ZOOM,
D-EFFECT, SHARPNESS, COLOR, SYNC, USER TITLE,
LANGUAGE function by yourself in the SPECIAL menu.
1. Select [SPECIAL] option.
2. Press [SET] button and the SPECIAL menu
appears.
SYSTEM Setting
1. Select the [SYSTEM] menu.
2. Press [SET] button and the SYSTEM menu
appears.
3. Use [UP] or [DOWN] button to select the option.
• FACTORY RESET: To reset the camera
setting to factory setting, select the
[FACTORY RESET] option.
4. Press [SET] button to confirm your selection.
NOTE:
The menu screen is move to top menu, after set up
[Factory Reset].