Mitsubishi Electric 900D-ID Operation Manual page 33

Error messages
Printer busy Any button is pressed during data
transfer.
No image for this The PRINT button is pressed when
MODE no picture data is stored in the
memory position.
Printer not found The power is off or a cable is not
connected.
Unknown printer A printer other than CP900DW(ID)
is connected.
Please turn off The Compact Flash is pulled out
the power then when the power is turned on.
turn on with CF
card
DPS not found When DPS mode, no USB cable is
connected or the PC is not running.
Ink type S-size ink sheet is installed when L-
mode is selected in the menu.
Unusable format Initial process for CF card insertion.
card The format of the card is not
suitable.
Access problem Errors concerning the Compact
1 - 8, 20 Flash
Data full 1 - 3 Errors concerning the Compact
Flash
Causes Countermeasures
Wait until the printing is completed.
Take a picture to store it in the
memory.
Turn on the power or connect the
cable.
Connect with CP900DW(ID).
Turn off the power and insert the
Compact Flash. Then, turn on the
power again.
Connect the USB cable or start up
the PC and start an application
software.
Change to the L-size ink sheet.
Format the Compact Flash by
FAT12 or 16.
Replace the Compact Flash.
Replace the Compact Flash.
33