Mitsubishi Electric 900D-ID Operation Manual page 12

6 6 6 6 6
Press EV button to adjust brightness when taking picture.
EXP. is displayed.
• If FLASH : OFF is selected on CAPTURE menu, EV is
displayed.
7 7 7 7 7
Press T (+) or W (-) button to adjust the brightness.
To make an image brighter, increase the value.
To make an image darker decrease the value.
8 8 8 8 8
Press SET button.
9 9 9 9 9
Press SHOT button halfway to adjust focus.
During focus adjusting, the focus mark ( ) appears.
When focus is adjusted, the focus mark disappears.
A A A A A
Press SHOT button down completely to take a picture.
The image is memorized in the camera.
The camera is switched to PLAY mode. A mark
played.
DS00075
4 D a 96T
Total number of images
(when using Compact Flash)
• Four images can be memorized in the camera.
• When a Compact Flash is inserted, the images are
memorized only in the Compact Flash.
B B B B B
When taking more pictures, press CAMERA/PLAY button.
Switch the camera to CAMERA mode. Then, repeat the above
steps 9 to 10.
• If brightness of the image is not adjusted correctly, repeat
the above steps 6 to 10.
12
NOTE
Focus mark
File name
4 D a M 1
Position the image memorized
(when not using Compact Flash)
NOTE
EV B/W
SET
T
W
+
-
EV B/W
SET
T
W
+
-
EV B/W
SET
T
W +
-
COLOR
PRINT
EV B/W
SET
T
W +
-
will be dis-
PLAY mode mark
DS00075
4 D a
EV
SET
T
W
+
-
E X P.
+ 5
MULTI COLOR
4 D a n
E V.
- 0 . 5
MULTI COLOR
4 D a n
MULTI COLOR
MULTI COLOR PRINT
96T
B/W MULTI COLOR PRINT