Aastra 6863i Installation Manual page 13

4. Using your index finger and thumb, rotate the handset hook 180° as illustrated in the figure below.
The handset hook is now in the correct position ensuring that your phone's handset securely stays on hook when
the phone is mounted to the wall.
5. Using the provided screws, attach the Wall Mount Base to the wall ensuring the Vertical Screw Lock Hole is facing up.
Note:
Depending on the wall type, you may need to use wall anchors. Two wall anchors are included with your 6863i IP
.
Phone
6. On the back of your phone, connect the provided Ethernet cable into the network port marked with
other end of the Ethernet cable directly into the network jack on the wall.
41-001505-00 REV00 – 04.2014
Installation and Setup
. Plug the
10