Changing The Language Setting - Sony HDR-CX560V Operating Manual

To turn off the power
 Close the LCD screen.
 If the viewfinder is pulled out, retract the viewfinder as shown in the illustration below
(HDR-CX700/CX700V).
The (Movie) lamp flashes for a few seconds and the camcorder is turned off.
Tips

You can turn off the camcorder also by pressing POWER.

When [Power On By LCD] (p. 95) is set to [Off], turn off your camcorder by pressing POWER

(HDR-CX560/CX560V).
On turning the camcorder on or off using the LCD screen or the viewfinder
(HDR-CX700/CX700V)
The power of the camcorder is turned on or off depending on the status of the LCD screen or
the viewfinder.
Status
LCD screen Viewfinder
Retracted
Open
Pulled out
Retracted
Closed
Pulled out

Notes
Even if the LCD screen is closed, if the viewfinder is pulled out, the camcorder is not turned off. When

you turn off the power of the camcorder, make sure that the viewfinder is retracted to the original
position.

Changing the language setting

You can change the on-screen displays to show messages in a specified language.
(MENU)  [Setup]  [
Touch
a desired language 
Power of the
camcorder
On
On
Off
On
(General Settings)]  [Language Setting] 
 
.
US
0