Saving Highlight Playback; Scenario Save) - Sony HDR-CX560V Operating Manual

Movie: Play the desired movie, and then


touch
use in a Highlight Playback.
Photo: Play the photo you want to use in a

Highlight Playback, and then touch

Notes
You cannot set a Highlight point when the Map

View is displayed (HDR-CX560V/CX700V).
However, the Highlight point that was set when
the Event View was displayed can take effect on
the Map View.
The audio used for the Highlight Playback will

be converted to 2ch stereo.
The [Playback Range] setting is cleared when

the Highlight Playback stops.
When you connect the camcorder to an

external device, such as a TV, and watch
Highlight Playback or Highlight Scenario, these
images do not appear on the LCD screen of the
camcorder.
Tips

You can select [Highlight Setting] on the screen

after a Highlight Playback has finished.
You can transfer music files from audio CDs

or MP3 files to your camcorder, and play them
with Highlight Playback using the supplied
software "PMB" or "Music Transfer, " a software
installed together with "PMB. "
After the music file is transferred to the

camcorder, if you cannot play the music, the
music file may be damaged. Delete the music
file by touching
(Playback Settings)]  [Empty Music],
[
then transfer the music file again. If you
delete music files using [Empty Music], the
music data recorded on your camcorder at the
factory will be deleted too. In this case, you can
restore them using Music Transfer, a software
installed together with "PMB. " For operating
instructions, see Music Transfer help.
at the point you want to
.
(MENU)  [Setup] 

Saving Highlight Playback

(

Scenario Save)

You can save a Highlight Playback as a
"Scenario. "
 [
Touch
during Highlight Playback.
To play back a saved scenario
Touch
(MENU)  [Playback Function]
 [
Scenario], select the desired scenario, and
then touch .
To erase a saved scenario
Touch [ Scenario Erase] on the screen
after the scenario playback you want to
erase has finished, or touch
playing the scenario you want to erase, then
select [Erase].
US

Scenario Save]
while