Sony HDR-CX560V Operating Manual page 173

USB LUN Setting
Improves compatibility with external
devices by limiting the functions of the USB
connection.
 Multi
Use this setting for ordinary operations.
Single
Try this setting only if you cannot connect to
an external device.

Notes
When you use "PMB Portable" to upload

images to a service on the Internet, make sure
to set [USB LUN Setting] to [Multi].
Disc Burn
See page 57.
Beep
 On
A melody sounds when you start/stop
recording, or operate the touch panel.
Off
Cancels the melody.
LCD Brightness
You can adjust the brightness of the LCD
screen.
 Normal
Normal setting (normal brightness).
Bright
Select this when the LCD screen is not bright
enough.
Tips

This adjustment does not affect the recorded

images in any way.
Your Location (HDR-CX560V/
CX700V)
See page 49.
GPS Setting (HDR-CX560V/
CX700V)
You can select whether the camcorder
receives or does not receive GPS signals
(p. 47).
 On
Receives GPS signals.
Off
Does not receive GPS signals.

Notes
If you set [GPS Setting] to [Off], the location

information that has previously been recorded
will be invalid. The location information will
not be recorded until triangulating is finished
successfully after you switch the [GPS Setting]
to [On].
REC Lamp (Recording lamp)
You can make the camera recording lamp
on the front of your camcorder not to turn
on.
 On
The camera recording lamp lights up.
Off
The camera recording lamp does not light up.
US