Using The Camcorder - Sony HDR-CX560V Operating Manual

Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/
TV technician for help.
The supplied interface cable must be used
with the equipment in order to comply with
the limits for a digital device pursuant to
Subpart B of Part 15 of FCC Rules.
For the State of California , USA only
Perchlorate Material – special handling may
apply,
See
www.dtsc.ca.gov/hazardouswaste/
perchlorate
Perchlorate Material: Lithium battery
contains perchlorate.
Supplied items
The numbers in ( ) are the supplied
quantity.
ÿ AC Adaptor (1)
ÿ Power cord (Mains lead) (1)
ÿ Component A/V cable (1)
ÿ A/V connecting cable (1)
ÿ USB connection support cable (1)
Use this cable when the Built-in USB Cable
of the camcorder (p. 15) is too short for
connection.
ÿ Lens hood (1) (Only for HDR-CX700/
CX700V)
To attach the lens hood, see page 76.
ÿ Wireless Remote Commander (1)
A button-type lithium battery is already
installed. Remove the insulation sheet before
using the Wireless Remote Commander.
ÿ Rechargeable battery pack NP-FV50 (1)
ÿ CD-ROM "Handycam" Application
Software (1) (p. 40)
"PMB" (software, including "PMB Help")
US
8
"Handycam" Handbook (PDF)
ÿ "Operating Guide" (This manual) (1)
This camcorder has a built-in software
application called "PMB Portable" (p. 43).
See page 22 for the memory card you can use
with this camcorder.

Using the camcorder

Do not hold the camcorder by the following
parts, and also do not hold the camcorder by
the jack covers.
Viewfinder (HDR-CX700/ Lens hood (HDR-CX700/
CX700V) CX700V)
LCD Screen Battery pack
Built-in USB Cable
The camcorder is not dustproofed, dripproofed
or waterproofed. See "Precautions" (p. 69).