Connecting A Power Source; To Use The Ac Power Adapter And Dc Cable; To Select The Camcorder Mode - Samsung VP-D907D Owner's Instruction Book

ENGLISH
Preparation

Connecting a Power Source

There are two types of power source that can be connected to your
camcorder.
- The AC Power Adapter and AC cord : used for indoor recording.
- The Battery Pack : used for outdoor recording.

To use the AC Power adapter and DC Cable

1. Connect the AC Power adapter to the AC
cord.
2. Connect the AC cord to a wall socket.
Notes
I
You must use the AA-E7 type AC Power
adapter.
I
The plug and wall socket type may differ
according to your resident country.
3. Connect the DC cable to the DC jack
socket of the camcorder.
(You should keep outside the projection
of the DC cable.)
4. Set the camcorder to the desired mode
by holding down the tab on the
power switch and turning it to the
CAMERA or PLAYER mode.

To select the CAMCORDER mode

✤ If you want to use this unit as a camcorder,
set the mode switch to TAPE position.
✤ If you want to use this unit as a DSC
(Digital Still Camera), set the mode switch to
MEMORY position.
-
-
Power Switch
< CAMERA mode >
1.
2.
I
I
3.
4.
< PLAYER mode >
✤
✤
(
)
CAMERA PLAYER
DSC
23 23