Inserting And Ejecting A Cassette - Samsung VP-D907D Owner's Instruction Book

ENGLISH
Preparation

Inserting and Ejecting a Cassette

✤ When inserting a tape or closing a cassette holder, do not apply
excessive force.
This may cause a malfunction.
✤ Do not use any tapes other than Mini DV cassettes.
1. Connect a power source and slide the TAPE EJECT
switch and open the cassette door.
I
If Multi-AV and USB or DV cable are not
connected with camcorder, close the jack
cover surely.
- The cassette holding mechanism rises
automatically.
2. Insert a tape into the cassette holder with the tape
window facing outward and
the protection tab toward the top.
3. Press the area labelled PUSH on the cassette
holding mechanism until it clicks into place.
- The cassette is loaded automatically.
4. Close the cassette door.
- Close the door completely until you can hear
a "click".
Notes
I
Before opening the cassette door, make sure that the jack cover is
closed.
I
When you have recorded something that you wish to keep, you
can protect it so that it will not be accidentally erased.
a. Protecting a tape :
Push the safety tab on the cassette so that the hole is uncovered.
b. Removing the tape protection :
If you no longer wish to keep the recording on the cassette, push
the write-protect tab back so that it covers the hole.
• How to store a tape
a. Avoid places with magnets or magnetic interference.
b. Avoid humidity and dust prone places.
c. Keep the tape in an upright position and avoid storing it in direct
sunlight.
d. Avoid dropping or knocking your tapes.
jack cover
1 2
3 4
push
a. SAVE
b. REC
✤
✤
1.
I
Multi-AV
-
2.
3. PUSH
-
4.
-
I
I
a.
b.
•
a.
b.
c.
d.
DV
TAPE EJECT
USB DV
27 27