Samsung SSC21WEB User Manual page 30

SSC21WEB-1 2004.8.25
3-7) NETWORK SETTING function and setting method
5:38 PM Page 30
• Function: Allows users to select the STATIC (fixed) IP, DHCP, PPPoE of Setting.
Setting method: Move to #7, NETWORK SETUP MENU by using œ œ ENTER√ √ SWITCH at
•
SETUP MENU, then press the ENTER SWITCH to display the OSD as shown in the figure below.
(The figure shows the initial setting status)
06/01/03 13:14:00
NETWORK SETTING
1. NETWORK ACCESS STATIC.../DHCP.../PPPoE...
2. HTTP PORT 00080
NETWORK STATUS
IP ADDR 192.168.1.200
GATEWAY 192.168.1.65
SUBNETMASK 255.255.255.0
DNS 1 168.126.63.001
DNS 2 168.126.63.002
MAC ADDR 00:30:6f:ff:00:00
MOVE TO EACH item by using œ œ ENTER√ √ switch, and change the set value.
Static IP User
- Constituted by Static IP on the TCP/IP network
1) Move to 'STATIC...' by using œ œ ENTER√ √ at NETWORK ACCESS, then press ENTER SWITCH
to set STATIC...
(STATIC : Select in case the network configuration of SSC21WEB is fixed IP (Public or Private IP)
06/01/03 13:14:00
STATIC ACCESS
IP ADDR 192.168.1.200
GATEWAY 192.168.1.65
SUBNETMASK 255.255.255.0
DNS 1 168.126.63.001
DNS 2 168.126.63.002
2) Move to IP ADDR / GATEWAY / SUBNETMASK by using œ œ ENTER√ √ .
3) Press ENTER SWITCH and type in IP ADDR / GATEWAY / SUBNETMASK respectively.
4) DNS 1 and DNS 2 will be automatically set to DNS as shown below.
Use œ œ ENTER√ √ switch to change it.
Eng-30