Advertisement
EMBROIDERING WITH A HOOP
It is easy to follow a stamped design or to work
free hand when embroidering or monograming.
Release the pressure from the foot by pressing
down on the snap lock ring darner. Turn the drop feed
dial to "DOWN" position.
Stretch the fabric in an embroidery hoop, and
place under the needle after removing the presser foot.
Set the stitch width at the size you prefer and lower
the presser bar lifter. Then operate the machine at a
rather high speed while moving the hoop slowy with
both hands. Work carefully and be sure to keep fingers out of the path of
the needle.
27
Fig. 39
Advertisement
