Advertisement
24
CREATIVE EMBROIDERY
Be sure zigzag presser foot
and
zigzag
needle plate are in place.
1. Set pattern selector (C, Fig. 16) at"["pos ition.
2. With th zigzag width control (D, i-ig.16) set at the Number 5 and stitch length control
(A, Fig.
ib)
as near 0 as possible without stopping the feeding action, a satin
stitch is
produced (Fig. 38).
4. With the machine set for a short stitch length, different designs can be made by turning the
zigzag width control back and forth between 0 and 5
or
any other combinatio"c of widths.
Try setting the zigzag width control (D, Fig. 16) at the first line and the various o.her lines.
Set a rhythm for yourself and then proceed. After a while you will become quite skillful,
varying your designs by the speed of the machine, stitch length and manipulation of the
zigzag width control.
Fog. 38
Advertisement
