Advertisement
30
ADJUSTING AND CHANGING "V" BELT
Fg. 46
(1)
To adjust "V" belt, loosen screws (A, Fig. 46,) and move bracket B up to loosen belt and down to
tighten.
To remove "V' belt:
(2)
(A Remove top cover.
(B) Loosen c'utch (C,
(C) Loosen screws "A" and move bracket "B" to its highest position.
(D) Slip belt off motor pulley and then over hand wheel.
(E) Replace "V" belt by slipping it over hand wheel and then oer motor pulley,
Advertisement
