Setupfru; A.2.5 Setupfru - Fujitsu SPARC Enterprise M4000 Features Manual

DomainID X does not exist.
[Explanation] No LSB was set up on the domain, when the DCL of configuration-
policy was changed.
[Remedy] Set up the domain and LSB. Try again.
Invalid parameter.
[Explanation] There is an error in the specified argument or operand.
[Remedy] Confirm the specified argument or operand and execute the command
once again.
Permission denied.
[Explanation] Do not have privilege.
[Remedy] Confirm the user privilege and the command privilege. In the case of
high-end servers, please also confirm whether command is executed by XSCF on
standby side.
An internal error has occurred. Please contact your system
administrator.
[Explanation] DR failed. There is a possibility that DR failed because of an internal
error in XSCF.
[Remedy] Find out the cause of the DR failure referring monitoring message and
error log. Please also confirm the XCP version.
A.2.5

setupfru

SB#XX is currently in use.
[Explanation] Because the system board of the PSB is running on the domain or is
assigned, PSB configuration cannot be changed.
[Remedy] Please confirm whether the system board of the PSB is assigned to the
domain or not, and release the system board if it is in the assigned status.
SB#XX is not installed.
[Explanation] Because PSB is not installed, it could not be set.
[Remedy] Please execute it again after confirming installation of the hardware.
Operation has completed. However, a configuration error was
detected.
A-34 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User's Guide • January 2012