Deleteboard; A.2.2 Deleteboard - Fujitsu SPARC Enterprise M4000 Features Manual

[Remedy] Confirm the current hardware configuration and support status.
A hardware error occurred. Please check the error log for
details.
[Explanation] Hardware error occurred. Please confirm monitoring message and
the error log.
[Remedy] Find out the cause of the DR failure referring monitoring message and
error log. Replace the failure component.
An internal error has occurred. Please contact your system
administrator.
[Explanation] DR failed. There is a possibility that DR failed because of an internal
error in XSCF.
[Remedy] Find out the cause of the DR failure referring monitoring message and
error log. Please also confirm the XCP version.
Timeout detected during self-test of XSB#XX-X.
[Explanation] Because the hardware diagnosis in DR did not complete, a timeout
occurred. There is a possibility that a hardware error occurred.
[Remedy] Find out the cause of the DR failure referring monitoring message and
error log. Replace the failure component.
A.2.2

deleteboard

XSB#XX-X will be unassigned from domain immediately. Continue?
[y|n]:
[Explanation] Confirming whether DR operation is going to be executed or not.
Input "y" to execute it and "n" to stop it.
XSB#XX-X will be unconfigured from domain immediately. Continue?
[y|n]:
[Explanation] Confirming whether DR operation is going to be executed or not.
Input "y" to execute it and "n" to stop it.
XSB#XX-X will be unassigned from domain after the domain
restarts. Continue? [y|n]:
[Explanation] Confirming whether DR operation is going to be executed or not.
Input "y" to execute it and "n" to stop it.
Appendix A Message Meaning and Handling A-27