Hands-Free Phoning; Calling A Number In The Phone Book; Dialing A Number; Calling A Number In The Call Log - Kenwood KDC-U7056DAB Instructions Manual

Hands-free phoning

14-5. Speed dialing (Preset dial)

1
Press [Ú].
"BT MODE" appears and enter the Bluetooth mode.
2
Select "Preset Call" using [Control] knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 9).
3
Turn [Control] knob to select a recall number
("P1" – "P6").
4
Press [Ú].
Makes a call.
Registration of dial number
• You need to register the preset dial number. Refer to <14-6.
Registering in the preset dial number list> (page 68).
68
|
KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056BTL
14-6. Registering in the preset dial
number list
1
Press [Ú].
"BT MODE" appears and enter the Bluetooth mode.
2
Enter the phone number you wish to register
Enter the phone number with reference to the
following:
<14-3. Dialing a number> (page 67)
<14-4. Calling a number in the call log> (page
67)
<14-2. Calling a number in the phone book> (page
66)
3
Press and hold [Control] knob.
4
Turn [Control] knob to select a memory
number ("P1" – "P6").
5
Press and hold [Control] knob.
Exiting from the Bluetooth mode
Press [Ú].

14-7. During a call

Disconnecting a call
Press [Ú].
Switching to the Private mode
Press [E] or [F].
Pressing this knob each time switches between the
private talk mode ("PRIVATE") and hands-free talk
mode.
When the previous source is restored in the Private mode
• Depending on the type of your cell phone, switching to
the private talk mode may select the source that was used
before commencing the hands-free connection. If this
happens, the source cannot be switched back to the hands-
free talk mode by operating this unit. Operate your cell
phone to return to the hands-free talk mode.
Adjusting the voice volume during a call
Turn [Control] knob.
14-8. Clearing the disconnection
message
1
Press [Ú].
"HF Disconnect" disappears.
|
English
69