Table of Contents
Advertisement
Bits Per Second
Use this item to select the serial port transmission speed. The speed used in the host
computer and the client computer must be the same. Long or noisy lines may require lower
transmission speed. he options include [9600], [19600], [57600] and [115200].
Flow Control
Use this item to set the f low control to prevent data loss from buffer overf low. When
sending data, if the receiving bufers are full, a "stop" signal can be sent to stop the data
low. Once the bufers are empty, a "start" signal can be sent to restart the low. Harware
low uses two wires to send start/stop signals. he options include [None], [Hardware RTS/
CTS], and [Sotware Xon/Xof].
Data Bits
Use this item to set the data transmission size. he options include [7] and [8] (Bits).
Parity
Use this item to select the parity bit. he options include [None], [Even], [Odd], [Mark] and
[Space].
Stop Bits
he item indicates the end of a serial data packet. he standard setting is [1] Stop Bit. Select
[2] Stop Bits for slower devices.
40
Advertisement
Table of Contents
