Selecting Transmit Power "Power; Selecting Off Transmission Tone "Roge; Timer Transmission "Tot - Baofeng UV-B5 User Manual

ADVANCED OPERATION

4. SELECTING TRANSMIT POWER "POWER"

Select the transmission power high or low in the transceiver, following the procedure
detailed below:
1. Press the [MENU], then press [UP]/[DOWN] to select the Menu 04
"POWER"
2. Press [AB/], then press [UP]/[DOWN] to select HIGH/LOW.
3. Press [AB/] to save the setting.
4. Press [MENU] or any numeric key to exit.

5. SELECTING OFF TRANSMISSION TONE "ROGE"

If you want the same group to know when you release the PTT, off transmission, you
may activate this function, please follow the steps:
1. Press the [MENU], then press [UP]/[DOWN] to select the Menu 05 "ROGE"
2. Press [AB/], then press [UP]/[DOWN] to select ON/OFF.
3. Press [AB/] to save the setting.
4. Press [MENU] or any numeric key to exit.

6. TIMER TRANSMISSION "TOT"

This function can automatically control the time we transmit each time you press
[PTT] on the transceiver. This feature is very useful to avoid overheating if power
transistor works excessively. The transceiver will be off transmission automatically
according to the set time. Follow the steps below to set the timer transmission:
1. Press the [MENU], then press [UP]/[DOWN] to select the Menu 06 "TOT"
2. Press [AB/], then press [UP]/[DOWN] to select timer OFF/1 min/2min/.../7min.
3. Press [AB/] to save the setting.
4. Press [MENU] or any numeric key to exit.