Power (High/Low Rf Output Power Selection); Dw (Dual Watch Feature) - Baofeng UV-3R Mark II Reference

Grade1-3: the Least Sensitive VOX Gain Level - Set under too
much noise conditions.
When VOX function is activated, the LCD will display the
VOX ICON.
POWER (HIGH/LOW RF OUTPUT POWER
SELECTION)
Select the High/Low RF Output Power. Please set according to
the following instructions:
1) Press [ MENU/LOCK ] then rotate the [ DIAL ] knob to
MENU [7], POWER.
2) Press the [ U/V ] key to enter the set mode.
3) Clockwise or counterclockwise rotation of [ DIAL ] knob to
set: HIGH/LOW.
4) Press the [ U/V ] key to save the setting.
5) Press [ MENU/LOCK ] or [ PTT ] to EXIT to normal
operation. Note: When set to LOW output power, the LCD will
display the [ LOW ] ICON, and not display the ICON when set
to HIGH output power.

DW (DUAL WATCH FEATURE)

The transceiver's Scanning features include a two- channel
scanning capability, which allows you to operate between UHF
channel and VHF channel in the VFO mode, while periodically
checking a user-defined channel for activity. If one channel is
received the signal, the scanner will pause on that channel.
Please activate the DW feature according to the following:
1) Press [ MENU/LOCK ] then rotate the [ DIAL ] knob to
MENU [8], DW
2) Press the [ U/V ] key to enter the set mode.
3) Clockwise or counterclockwise rotation of [ DIAL ] knob to
set: OFF (disables the Dual Watch feature ON (activates the
Dual Watch feature).
4) Press the [ U/V ] key to save the setting.
Baofeng UV-3R Mark II Reference 7