Baofeng UV-B5 User Manual page 33

ADDITIONAL FEATURES AND SETTINGS
1. Under FM radio mode (VFO), press and hold down [VM/SCAN] about 2 seconds,
the display will flash "01-16".
2. Press [UP]/[DOWN] to select the memory location in which to store the radio
station.
3. Press [AB/] to save the station.
4. Repeat the above procedure to store more radio stations.
5. ALARM FUNCTION
1. Hold down the alarm button (Radio Overview F) to activate the alarm. It transmits
an alarm signal in the selected channel or frequency while the speaker will sound the
alarm.
2. Press the [PTT] or Alarm Button to deactivate the alarm.
Note:
If the location in which there is one radio station, the new radio station will replace the
old one.
6. SCANNING FM RADIO STATIONS
In operating mode of commercial FM radio, press [MENU], then press the
[VM/SCAN] to start scanning all radio stations. Press [UP]/[DOWN], to change the
direction of scanning stations.
Press any key to exit the scan function.
If during the scan, you want to store the radio station, press any key to exit the scan
and memorize the station using the steps described in the previous section.
Note:
- The communication between different transceivers is a priority. Therefore, if the
transceiver is in commercial FM radio mode, and a signal of another transceiver is
detected, the transceiver automatically will deactivate mode of commercial FM radio.