Adjusting The Lcd Monitor; Nastavení Lcd Monitoru - Samsung VP-X105 Owner's Instruction Book

Samsung digital camcorder owner’s instruction book
Hide thumbs Also See for VP-X105:
Table of Contents

Advertisement

ENGLISH
Getting Started

Adjusting the LCD Monitor

Your the CAM is equipped with a colour Liquid Crystal Display monitor,
which enables you to view directly what you are recording or playing
back. Depending on the conditions under which you are using the
CAM (indoors or outdoors for example), you can adjust the LCD
Brightness or Colour.
1. Move [Mode Selector] down to turn on the
CAM and move it down again.
N The Mode Selection screen appears.
2. Move the [ L /M ] switch to select
Settings
and press the [OK] button.
3. Move the [ L /M ] switch to select <Display>
and press the [OK] button.
4. Move the [ L /M ] switch to select <LCD
Brightness> or <LCD Colour> and press the
[OK] button.
5. Move the [ L /M ] switch to select desired
brightness or colour and press the [OK]
button.
N Refer to pages 88~89 for details.
Notes
✤ If you select [Back] in the menu, the previous
menu appears.
✤ If it is too bright, adjust the LCD Brightness.
Mode Selection
2
MP3
Voice Recorder
File Browser
System Settings
System
Back
System Settings
3
Display
Date / Time
System
Memory
Back
Settings: Display
4
LCD Brightness 20%
LCD Colour
Back
Settings: Display
5
LCD Brightness 20 %
LCD Colour
Back
Zaãínáme
Nastavení LCD monitoru
Zafiízení CAM je vybaveno displejem s tekut˘mi krystaly, na kterém
lze pfiímo nahrávan˘ nebo pfiehrávan˘ záznam.
V závislosti na podmínkách, ve kter˘ch zafiízení CAM pouÏíváte
(napfiíklad vnitfiní prostory nebo exteriéry), lze nastavit jas a barvy
displeje.
1. Pohybem ovladaãe [Ovladaã reÏimÛ] dolÛ
zapnûte zafiízení CAM a potom ovladaã znovu
posuÀte dolÛ.
N Zobrazí se obrazovka V˘bûr reÏimu.
2. Pohybem ovladaãe [ L /M ] vyberte poloÏku
System Settings <Nastavení systému>
stisknûte tlaãítko [OK].
3. Pohybem ovladaãe [ L /M ] vyberte poloÏku
<Display> <Displej> a stisknûte tlaãítko [OK].
4. Pohybem ovladaãe [ L /M ] vyberte poloÏku
<LCD Brightness> <Jas displeje> nebo <LCD
Colour> <Barvy displeje> a stisknûte tlaãítko
50%
[OK].
5. Pohybem ovladaãe [ L /M ] vyberte poÏadovan˘
jas a barvy a stisknûte tlaãítko [OK].
N Podrobnosti naleznete na stranách 88~89.
Poznámky
60 %
✤ KdyÏ vyberete v nabídce moÏnost [Back] <Zpût>,
zobrazí se pfiedchozí nabídka.
✤ Pokud je displej pfiíli‰ jasn˘, upravte jas displeje.
CZECH
a
29
29

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vp-x110Vp-x110lVp-x105l

Table of Contents