Installing Windows98Se Driver(For Windows98Se Only); Installing Windows98Se Driver (For Windows98Se Only); Instalace Ovladaãe Pro Systém Windows98Se (Pouze Pro Systém Windows98Se) - Samsung VP-X105 Owner's Instruction Book

ENGLISH
Miscellaneous Information:
Installing Programmes
Installing Windows98SE Driver
(For Windows98SE only)
To use the CAM as a removable drive on Windows98SE, you may
need to install the Windows98SE Driver.
1. Close all windows currently opened and
insert the provided software CD into the
CD-ROM drive.
2. Place the CAM on the cradle and connect
the USB cable to the USB port of the cradle.
USB Mode screen appears.
3. Move the [ L /M ] switch to select <USB 2.0 Mass Storage> or
<USB 1.1 Mass Storage> and press the [OK] button.
4. Installation process automatically begins.
Note
✤ During the Windows 98 SE driver installation, it may require to
insert Windows 98 operation system CD-ROM into the CD-ROM
drive to proceed.
120 120
Dal‰í informace: Instalace programÛ
Instalace ovladaãe pro systém Windows98SE
(pouze pro systém Windows98SE)
Aby bylo moÏné pouÏívat zafiízení CAM jako vymûnitelnou jednotku se
systémem Windows98SE mÛÏe b˘t nutné nainstalovat ovladaã pro
systém Windows98SE.
USB Mode
2
USB 2.0 MassStorage
USB 1.1 MassStorage
PC-Cam
Back
PictBridge
Poznámka
✤ Bûhem instalace ovladaãe v operaãním systému Windows 98 SE
bude pravdûpodobnû tfieba vloÏit do pfiíslu‰né jednotky v poãítaãi
disk CD-ROM s operaãním systémem Windows 98.
1. Zavfiete v‰echna aktuálnû otevfiená okna a
vloÏte dodan˘ disk CD se softwarem do
jednotky CD-ROM.
2. Umístûte videokameru do kolébky a pfiipojte
kabel USB k portu USB na kolébce.
Zobrazí se obrazovka reÏimu USB.
3. Pohybem ovladaãe [ L /M ] vyberte poloÏku
<USB 2.0 Mass Storage> nebo <USB 1.1
Mass Storage> a stisknûte tlaãítko [OK].
4. Automaticky bude zahájena instalace.
CZECH