Table of Contents
Advertisement
1.
Locate the hose at the foot end of the mattress.
2.
Locate the control unit connector on the right side of the control unit.
3.
Perform one of the following:
•
MA90Z Power Unit - Perform the following steps (Detail "A"):
i.
Squeeze and hold the tabs on the hose connectors.
ii.
Insert the hose connectors into the control unit connector.
iii.
Push the hose connectors onto the control connector until an audible click is heard.
The audible click indicates that the hose connector(s) are properly engaged with the control connectors.
•
MA95Z Power Unit - Perform the following steps (Detail "B"):
i.
Lift and hold the connector cover up.
ii.
Push the hose connector onto the control connector.
iii.
Ensure the hose connector is flush with the control unit connector.
Control Unit
Part No 1148139
DETAIL "A" - MA90Z
CONNECTOR
MA90ZB42
MA90ZB48
Connector
Tab
FIGURE 3 Connecting the Hose
DETAIL "B" - MA95Z CONNECTOR
MA90Z,
and
Connector
Hose
Cover
Control Unit
Connectors
17
4 OPERATION
MA95Z, MA95ZB42 and
MA95ZB48 Hose
Connector
®
Invacare
MA90Z Series Mattresses
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
