The powered mattress comes with ten nylon buckle straps.
1.
Remove the original foam mattress from the bed.
2.
If necessary, lower the side rails to facilitate installation of the mattress.
3.
Unroll the powered mattress and place it on the bed frame.
Ensure that the hose is towards the foot end of the bed.
4.
Use the buckle straps to secure the powered mattress to the bed deck in the following locations:
•
Head End - Head End Bed Deck
•
Foot End - Foot End Bed Deck
Mattress cover not
shown for clarity.
Part No 1148139
Head End
Buckle Straps
Hose
FIGURE 1 Installing the Mattress Replacement System
•
Center - Center of the Bed Frame
15
4 OPERATION
Powered
Mattress
Foot End
®
Invacare
MA90Z Series Mattresses