Tires - Qlink Rodeo 90 User Manual

You can aadjust the drive chain as the Follow ing:
1. Loosen nuts 1 - 4 and 5 .
2. Adjust the slack in the drive chain by turning the chain adjuster bolt
equally to tighten or slacken the chain.
3. When proper slack is obtained, tighten the nuts
4. Tighten the adjusting nuts.
WARNING
Failing to inspect the drive chain slack before each use of the ATV could be hazardous.
Too much chain slack could cause the chain to come off the sprockets, resulting in an accident or serious damage
to the ATV.
Inspect the drive chain slack before each use.

TIRES

The ATV is equipped with low pressure tubeless tires of the size and type listed below:
USER'S MANUAL
5 .
Front
Size
AT19×7-8
Size
50
6 .
Rear
AT19×9.5-8