Qlink Rodeo 90 User Manual page 36

USER'S MANUAL
Move the ATV forward and backward to check that the wheels roll freely.if you can not move the ATV,the tires
may be frozen to the ground,or the brakes may be forzen to the wheels,if the tires are frozen to the ground,pour
warm water around them to melt the ice,if the brakes are frozen, bring the ATV to a warmer area to thaw out the
brakes.
After the engine has warmed up ,check the brakes.Do this inspection on level ground and do not exceed ,the
walking speed.Be sure to check the operation of both front and rear brake,if the brake do not work adequately,
stop riding the ATV.
CAUTION
using engine power to free up frozen wheels could damage your ATV.
Severe damage to the drive main may occur if you use engine power to free frozen wheels.
Before riding,manually move the ATV forward and backward to make certain that all wheels roll freely.
Bring the ATV to a warmer area to make the brake to thaw out.After the brake thaw , dry it by applying it several
times while ridin g for. If the brake does regain full stopping power, ask your dealer check it before you continue
riding your ATV.
Water that enter the brakes may freeze after you parked your ATV.The frozen water can prevent the wheels form
turning or the brake form working.After riding through water. Mud,snow, or slush it is important to dry the brake
before parking the ATV,To dry the brake,apply them for several times while riding slowly . Before your next
ride, be sure to do a pre-ride inspection as described earlier in this section.
32