Qlink Rodeo 90 User Manual page 31

Table of Contents

Advertisement

To climb a hill with the ATV,following the directions below.
1. Speed up and maintain a steady speed before reaching the bottom of the hill.
Remember that you must ride at a steady speed all the way to the top of the hill.
2. Shift bod y forward by sliding forward on the seat.Lean slighty forward.For steep
hills,stand on the footrests and lean out over the front wheel,
3. Maintain a steady speed while climbing the hill.
4. Slow down gradually when you reach the top of the hill.
WARNING
Stalling,rolling backwards or improperly dismounting the ATV while climbing
a hill could be hazardous.
The ATV could overturn if you do not climb a hill properly.
Maintain a steady speed when climbing the hill. Always follow the proper
procedures for climbing hills as described in this section.
You may start to climb a hill and are able to make it to the top.If this happens,
use the correct procedure described below to turn around to get down the hill.
If you still have forward movement and enough space to turn around safely,follow these instructions.
1.Turn around on the hill before you lose forward speed.As you turn on the side of the hill, lean your body weight
uphill.
2. Once you have turned around,ride down the hill as described in the DESCENDING A HILL section.
USER'S MANUAL
27

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for Qlink Rodeo 90

Table of Contents