Starting The Engine - Qlink Rodeo 90 User Manual

USER'S MANUAL
Avoid Constant Low Rotating Speed
Operating the engine at constant low rotating speed (light load) can cause parts to glaze and not seat properly.
Allow the engine to accelerate freely without exceeding the maximum throttle limit.
Allow the Engine Oil to Circulate Before Riding
Allow enough idl ing time after warm or cold engine starting. This allows the lubricating oil to reach all critical
engine components.
Observe Your Initial and Most Critical Service
The initial service (break-in maintenance) is the most important service that your vehicle will receive. During
break-in operation, all of the engine components will mate together and seat properly. Mainten ance require d
as part of the initial service includes correction of all adjustments, tightening of all bolts & nuts and replacement
of dirty oil. Timely performance of this service will help you get the best service life and performance of the
engine.

STARTING THE ENGINE

Before attempting to start the engine,make sure to follow these steps.
1. turn the key switch to the ON position.
2. Set the engine stop switch to the " " position.
3. Apply the rear brake lever and make sure that the rear wheels are in locking codition.
4. Press the starter button " "and start the engine.
17