Replacing the Casters
This procedure MUST be performed by a qualified technician.
Front Caster
NOTE: For this procedure, refer to
FIGURE 8.3.
1. Remove the locknut, washer, spacer
and socket screw that secures the front
caster to the caster support plate.
2. Remove the existing front caster.
3. Reverse STEPS 1‐2 to install the front
caster.
Rear Caster
NOTE: For this procedure, refer to
FIGURE 8.4.
1. Remove the hex bolt, two washers,
spacers and locknut that secure the rear
caster to the caster support plate.
2. Remove the existing rear caster.
3. Reverse STEPS 1‐2 to install the rear
caster.
Part No 1141431
WARNING
Caster Support
Plate
Spacer
Washer
FIGURE 8.3 Replacing the Casters - Front
Hex Bolt
Washer
Caster Support Plate
Spacers
Rear
Caster
Washer
Locknut
FIGURE 8.4 Replacing the Casters - Rear
35
SECTION 8—MAINTENANCE
Socket
Caster
Caster
Reliant™ 440
Screw
Front
Caster
Locknut