Adjusting The Built-In Clock - AND UA-1010 Instruction Manual

Adjusting the Built-in Clock

Adjust the clock prior to use.
1. Press the SET button until the year starts
blinking.
2. Select the year using the
Press the SET button to set the current year
and move to month/day selection. The date
can be set anywhere between the years 2010
and 2059.
3. Select the month using the
Press the SET button to set the current
month and move to day selection.
4. Select the day using the
Press the SET button to set the current day
and move to hour/minute selection.
5. Select the hour using the
Press the SET button to set the current hour
and move to minute selection.
6. Select the minute using the
Press the START or SET button to turn the
device off.
Holding down the
the value continuously.
Note: After three minutes of non-operation, the device
will turn off automatically.
When the clock has not been
set, the clock display indicates
dashes as shown to the right.
Using the Monitor
or button.
or
or button.
or button.
or
or button will change
English 8
button.
button.
Press
Year
or
Month
Day
or
Hour
Minute
or
START
Turn off
Pressing the START
button will turn the
device off anytime.
or
or
or