Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Advertisement
Table of Contents
Related Manuals for AND UA-1010
Summary of Contents for AND UA-1010
- Page 1 Digital Blood Pressure Monitor Model UA-1010 Instruction Manual Original Manuel d’instructions Traduction Manual de Instrucciones Traducción Manuale di Istruzioni Traduzione 使用手冊 翻譯 1WMPD4002223C...
-
Page 2: Table Of Contents
Congratulations on purchasing a state-of-the-art A&D blood pressure monitor, one of the most advanced monitors available today. Designed for ease of use and accuracy, this device will facilitate your daily blood pressure regimen. We recommend that you read through this manual carefully before using the device for the first time. -
Page 3: Preliminary Remarks
Precision components are used in the construction of this device. Extremes in temperature, humidity, direct sunlight, shock or dust should be avoided. Clean the device and cuff with a dry, soft cloth or a cloth dampened with water and a neutral detergent. Never use alcohol, benzene, thinner or other harsh chemicals to clean the device or cuff. -
Page 4: Parts Identification
Display Average MEMORY I.H.B. Symbol (Irregular heartbeat symbol) Systolic Cuff Fit Error Symbol Pressure Movement Error Symbol Diastolic Heart Mark Pressure WHO Classification Indicator and Pressure Bar Indicator Pulse Rate Battery Indicator Clock Display AM / PM Mark English 3... -
Page 5: Symbols
Standby and Turn the device on. Battery installation guide Direct current Serial number Date of manufacture 2010 Type BF: Device, cuff and tubing are designed to provide special protection against electrical shocks. EC directive medical device label WEEE label Manufacturer... - Page 6 Take another measurement. Unstable blood pressure due to Remain very still during movement during measurement. measurement. The systolic and diastolic values are within 10 mmHg of each other. The pressure value did not increase Apply the cuff correctly, during the inflation.
-
Page 7: Operation Mode
Operation Mode 1. Normal Measurement Press the START button. Blood pressure is measured and the data is stored in memory. This device can store the last 90 measurements in memory. 2. Recalling the Data Press the button to recall the data in memory. -
Page 8: Using The Monitor
When (LOW BATTERY mark) blinks on the display, replace all batteries with new ones. Do not mix old and new batteries. It may shorten the battery life, or cause the device to malfunction. Replace the batteries two seconds or more after the device turns off. -
Page 9: Adjusting The Built-In Clock
2. Select the year using the button. Press the SET button to set the current year and move to month/day selection. The date can be set anywhere between the years 2010 Month and 2059. 3. Select the month using the button. -
Page 10: Selecting The Correct Cuff Size
The arm size is printed on each cuff. The index and proper fit range, on the cuff, tell you if you are applying the correct cuff. (Refer to "Symbols that are printed on the cuff") If the index points outside of the range, contact your local dealer to purchase a replacement cuff. -
Page 11: Applying The Arm Cuff
Relax for about five to ten minutes before measurement. Place the center of the cuff at the same height as your heart. Remain still and keep quiet during measurement. Do not measure right after physical exercise or a bath. Rest for twenty or thirty minutes before taking the measurement. -
Page 12: Measurements
When the measurement is complete, the systolic and diastolic pressure readings and pulse rate are displayed. Measurement The cuff exhausts the remaining air and in progress deflates completely. Press the button to turn the device off. START... -
Page 13: Measurement With The Desired Systolic Pressure
Measurements Measurement with the Desired Systolic Pressure Model UA-1010 is designed to detect the pulse and to inflate the cuff to a systolic pressure level automatically. Use this method when re-inflation occurs repeatedly or when the results are not displayed even if the pressure decreases to 20 mmHg or less. -
Page 14: Recalling The Memory Data
Recalling the Memory Data Note: This device stores the last 90 measurements in memory. 1. Press the button. Press The average of all measurements and the Average systolic number of data are displayed. (If no data, “0” is displayed. Press the Average diastolic... -
Page 15: What Is An Irregular Heartbeat
25% from the average of all heartbeats during the blood pressure measurement. It is important that you are relaxed, remain still and do not talk during measurements. Note: We recommend contacting your physician if you see this indicator frequently. -
Page 16: About Blood Pressure
30 to 50 mmHg due to various conditions during the day. In hypertensive individuals, variations are even more pronounced. Normally, the blood pressure rises while at work or play and falls to its lowest levels during sleep. So, do not be overly concerned by the results of one measurement. -
Page 17: Troubleshooting
The cuff position is not Place your arm on a table with your Readings are correct. palm facing upward and the cuff at too high or too the same level as your heart. low. If you have a very weak or... -
Page 18: Maintenance
Maintenance Do not open the device. It uses delicate electrical components and an intricate air unit that could be damaged. If you cannot fix the problem using the troubleshooting instructions, contact the authorized dealer in your area or our customer service department. The A&D customer service will provide technical information, spare parts and units to authorized dealers. - Page 19 Weight Approx. 265 g, excluding the batteries Applied part Cuff Type BF Useful life Device: 5 years (when used six times a day) Cuff: 2 years (when used six times a day) Accessory AC adapter The adapter is to connect the device to a power source at home.
- Page 20 Asahi 1-243, Kitamoto-shi, Saitama 364-8585, JAPAN Telephone: [81] (48) 593-1111 Fax: [81] (48) 593-1119 A&D INSTRUMENTS LIMITED Unit 24/26 Blacklands Way, Abingdon Business Park, Abingdon, Oxfordshire OX14 1DY United Kingdom Telephone: [44] (1235) 550420 Fax: [44] (1235) 550485 A&D ENGINEERING, INC. 1756 Automation Parkway, San Jose, California 95131, U.S.A.