Centralized Controller Installation (Optional)
Accessories
Centralized Controller(1)
Cable-Tie(2)
Transmitter(1)
Spacer Support(4)
Electrical component box
Transmitter
Main PCB
Sub PCB
60
E-
Cable Clamp(5)
TH M4 X 16 Tapped
Screw(7)
Cable-Tie(2)
1
Open the centralized controller cover by using two grooves on the top of it.
2
Secure the rear cover of the centralized controller on the wall with two
screws.
3
Secure the transmitter with four spacer supports into the electrical
component box.
4
Connect the cable from the PCB to the transmitter.
And connect another cable from the O1, O2 terminals to the transmitter as
shown in figure.