Installing the Front Panel
Front Panel
Front panel fixing holes
54
E-
1
Open the electrical component box cover removing the screws.
2
Connect the cables of the front panel to the PCB as shown in figure.
3
Close the electrical component box cover and secure the screws.
Eye
4
Install the front panel using two hooks on the both sides of the indoor
unit.
5
Secure the front panel to the indoor unit using the bolts(4EA).
Hook and Eye
N N
o o
t t
e e
N N
o o
t t
e e
Air blocking
kit
N When user's optional accessory is a wireless remote controller, you
have to install the receiver & display unit; refer to page 62.
N There are four kinds of air blocking kits. Fill up the air outlet(s) with
one or more kits depending on the situation, then install the
insulation to block air completely.