Modem / Phoneline Connection - AEG Protect Home Operating Instructions Manual

5.6

Modem / Phoneline Connection

Plug incoming internet line into the "In" socket at the side
panel of the PROTECT HOME.
Incoming phone,
fax, modem line
Use one more internet line cable and plug one end of the
internet line cable to the "Out" socket at the side panel of the
UPS.
5.7 Satellite TV protection
Connect the incoming antenna line with the F connectors
(optional via adapter plugs IEC) in the "IN" socket on the rear
of your PROTECT HOME. Use the second antenna line and
connect the "Out" socket with the Receiver, Decoder, TV, etc.
5.8 USB and serial cable (computer) connection
To allow for unattended system shutdown for your operating
system, connect the USB or the RS232 serial cable (both part
of the packing) as shown below. For the USB serial cable just
simply plug into the UPS and PC.
Do not plug heaters or other large electrical
device with high power consumption into the UPS.
The power demands of these devices will
overload and can execute the input fuse of the
PROTECT HOME.
In
Out
16