Fusion MS-IP700i User Manual page 27

700 series true marine entertainment system for ipod & true marine dvd entertainment system
Hide thumbs Also See for MS-IP700i:
Table of Contents

Advertisement

Padlock icon
• The padlock icon means the channel is locked or considered
mature content. If you select this channel you will be asked to unlock
parent mode, if it is not already unlocked.
Category
You can use the Category menu item to control which categories of
channels are available (Rock, for example) when you are using the Category tuning
method (see "Tuning Methods" on page 16.
To select a Category:
1. Press the Menu key.
2. Turn and then press the Encoder to select Category.
3. Do one of the following:
• To enable the Category Tuning method, turn and then press the Encoder to
select the required category name, "Rock" for example:
The Sirius Source Screen is displayed with the
Tuning mode indicator set to 'Category'.
51
• To disable the Category tuning method, press the Encoder to select All chan-
nels. The SiriusXM Source Screen is displayed with the Tuning mode indicated
set to 'Manual'.
4. Press the Menu key to exit the current menu or press and hold the Menu key to
close the menu completely.
Parental mode
Parental mode provides a way of preventing access channels marked by
SiriusXM as "Mature" or "Locked". You must enter a 4-digit access code to enter
Parental mode. When in Parental mode you can also change the 4-digit
access code.
Note: The factory setting for the access code is 0000. You can reset the
access code to 0000 by pressing and holding down the Mute key for 15
seconds.
To enter Parental menu:
1. Press the Menu key.
2. Turn and then press the Encoder to select Parental > Unlock. The following ac-
cess screen is displayed with the first digit highlighted:
3. Enter the access code by turning the Encoder to change the highlighted digit,
then press the Encoder to select the next digit. When you have
entered all four digits correctly, Parental mode is unlocked.
To change the Parental mode access code:
1. Press the Menu key.
2. Turn and then press the Encoder to select Parental > Change code.
The following access screen is displayed with the first digit highlighted:
52

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ms-av700i

Table of Contents