Fusion MS-IP700i User Manual page 23

To enter the name for the selected Zone:
a. Select the Name menu item. The current Zone name is displayed with the first
character highlighted.
b. If required, press the Forward (or Backward) key to highlight the character
you wish to change.
c. Turn the Encoder to display the required value for the highlighted character.
d. Press the Encoder to accept the displayed value and move to the next
character.
e. Repeat Steps b–d until you have worked through all the characters you wish
to change.
f. Press and hold down the Encoder to save the changes and exit.
PREPARING FOR iPod OR USB CONNECTION
This section describes how to prepare for iPod and USB input for the
MS-IP700i and MS-AV700i models.
When using your iPod with either model:
• Always disconnect your iPod from the unit when not in use and do not leave
in your vessel. This helps reduce risk of theft or damage as vessel cabins can
reach extreme temperatures.
• Do not remove iPod or use stereo in a distracting manner while operating the
vessel. Check and obey all marine laws in association with use.
43
MS-IP700i MODEL
Note: If you select iPod or USB input without first connecting the device, the
message "Not connected" is displayed on the screen.
Important Note: Connecting Supported iPods and iPhones to a
MS-IP700i Stereo
The MS-IP700i provides two connection options for iPod and iPhone users.
Supported devices may be either inserted into the internal dock or connected to the
external USB connector.
The MS-IP700i Stereo does NOT support multiple iPod or iPhone devices
connected simultaneously. Correct operation is only guaranteed with a single
iPod/iPhone device connected.
Note; For connection to the external USB connector a Apple sync cable or external
FUSION MS-DKIPUSB dock is required.
Before connecting iPod
To avoid damage and ensure safe operation, please read the following
information before using your iPod.
• Please ensure iPod dock connector is clean, dry and free from damage.
• Check that the unit's iPod dock is free from obstructions.
• Insert correct sleeve combination to match your iPod (never insert iPod
without the correct sleeve).
• Ensure iPod is inserted with display facing upwards.
• Never force your iPod into the dock, if the iPod does not mate with
reasonable ease, the sleeve/iPod combination is most likely incorrect.
• Take care when removing iPod from unit as surfaces may be warm.
To insert your iPod:
1. Press the door catch and open the control panel door.
Press the
door catch
Open
44