Chapter 3 Identifying External Components - Planet FSD-803PE User Manual

This section identifies all the major external components of the Switch. Both the front and
rear panels are shown followed by a description of each panel's feature.
Front Panel
The figure below shows the front panels of the switches.
Please refer to the LED panel section for detailed information about each of the switch's
LED indicators.
Rear Panel
DC Power Jack:
POE
Numbered MDI/
MDI-X Jacks:
10-000039-000.indd
IDENTIFYING EXTERNAL COMPONENTS
Front Panel of FSD-803PE
Rear panel of FSD-803PE
Power is supplied through an external AC power adapter.
Check the technical specification section for information about
the AC power input voltage. Since the switch does not include
a power switch, plugging its power adapter into a power out-
let will immediately power it on.
The Switch supports two power systems, 12VDC or powered
from POE. Port # 1 supports 802.3af in-line power. Either
power system can be deployed to the Switch at a time. And
12VDC will not active if POE port and POE power is in use.
Use these jacks to connect stations to the Switch. These are
numbered MDI/MDI-X jacks, which mean, you can use ordi-
nary straight or crossover twisted-pair cables to connect user
machines and servers to the switch through them.
9
Chapter 3
9
2004/8/27, 05:37