Setting Up The Progressive Scan - Samsung DVD-R125 Instruction Manual

Press the ...† buttons to select Video
4
Output, then press the OK or √ button.
No Disc
Programme
TV Aspect
3D Noise Reduction
Setup
HDMI/DVI Resolution : 576p
Video Output
MOVE OK
Component Select this when the Recorder is connected
to a TV with Component jack.
RGB Select this to output RGB signals.
Press the ...† buttons to select the desired
5
item, then press the OK or √ button.
In Component mode, you can set video output to
Progressive(P.SCAN) or Interlace, see page 36.
When the HDMI cable is not connected, available video
output jacks are as follow.
Available Video Output Jack
Component mode
Setting mode
Output jack P.SCAN off mode (Interlace mode) P.SCAN on mode
Component Output
O
(Y, Pb, Pr)
R, G, B
X
AV1 Scart
Composite
O
AV2 Scart Composite
O
O
Composite Video out
S-Video out
O
When the HDMI cable is connected, other
A/V output does not operate.
NOTE
Video
: 4:3 Letter Box
√ √
: Off
√ √
√ √
: Component
√ √
Component
RGB
RETURN EXIT
RGB Mode
O
X
(TV i n progressi v e mode)
X
O
X
X
X O
O
X
X O
Setting up the Progressive
scan
If the TV supports Progressive Scan, press the P.SCAN
button on the front of the DVD Recorder to enjoy.
1 With the unit in Stop mode, press the
P.SCAN button on the front of the DVD
Recorder.
The message "Press [Yes] to confirm Progressive scan
mode. Otherwise press [No]" will appear. Press the œ √
buttons to select Yes, and then press the OK button.
Press [Yes] to confirm Progressive scan mode.
Otherwise press [No]
Yes
2 The message "Please set your TV to
Progressive input. To deactivate, press
[STOP] key." will appear. Press the OK button.
Please set your TV to Progressive input.
To deactivate, press [STOP] key.
OK
The message "Video Output Mode
3
Progressive Scan" will appear.
Video Output Mode
Progressive Scan
When the HDMI cable is connected, this
screen is not displayed.
NOTE
Progressive setting is only available when
the DVD recorder is in stop mode.
Progressive setting is only available when
the Video Out is set to Component.
If the P.SCAN button on the DVD
recorder's front panel is pressed during
playback, the message "This function is
possible only on stop mode" appears on
the screen.
No
35
English -