Step 2: Connecting The System - Sony BDV-F7 Operating Instructions Manual

Step 2: Connecting the System
For connecting the system, read the information on the following pages.
Do not connect the AC power cord (mains lead) of the unit to a wall outlet (mains) until all the other
connections are made.
-
• When you connect another component with a volume control, tum down the volume of the other components to a
level where sound is not distorted.
To remove the panel cover of the unit
Before connecting the cables, remove the panel cover from the unit.
CI
CI
CI
Hold the panel
cover
at
(0),
then slide it out to
the side. -
• Before using the unit, remove the seal attached at the lower rear of the unit.
17
US