Sony BDV-F7 Operating Instructions Manual page 59

Symptom Problems and solutions
Video signals are only output
0
Set [Output Video Format] in [Screen Settings]
to
[Video] (page 50).
from the HOMI OUT jack when
connecting the HOMI OUT jack
and VIDEO OUT jack at the
same time.
The dark area of the picture is too • Set [Picture Quality Mode] to [Standard] (default) (page 38).
dark/the bright area is too bright
or unnatural.
The picture is not output
correctly.
Picture noise appears.
Even though you set the aspect
ratio in [TV Type] of [Screen
Settings], the picture does not fill
the TV screen.
Color irregularity occurs on the
TV screen.
Sound
Symptom
There is no sound.
No sound is output from the
HOM] OUT jack.
The left and right sounds are
unbalanced or reversed.
There is no sound from the
subwoofer.
o
Check the [Output Video Format] settings in [Screen Settings] (page 50).
o
If the analog and digital signals are output at the same time, set [BOIDVO-
ROM I080/24p Output] in [Screen Settings] to [Off] (page 50).
o
For BO-ROMs, check the [BO/OVO-ROM I080124p Output] settings in
[Screen Settings] (page 50).
• The disc is dirty or flawed.
o
If the picture output from your system goes through your VCR to get to your
TV, the copy-protection signal applied to some BOIDVO programs could affect
picture quality. If you still experience problems even when you connect your
unit directly to your TV, try connecting your unit to the other input jacks.
• The aspect ratio on the disc is fixed.
• If the speakers are used with a CRT-based TV or projector, install the speakers
at least 1.0 foot (0.3 meters) from the TV set.
o
If the color irregularity persists, turn off the TV set once, then turn it on after 15
to 30 minutes.
o
Make sure that no magnetic object (magnetic latch on a TV stand, health care
device, toy, etc.) is placed near the speakers.
Problems and solutions
o
The speaker cord is not connected securely.
o
Check the speaker settings (page 46).
• Fast forward or fast reverse is being performed. Press
~
to return to normal
play mode.
o
Slow forward or freeze frame is being performed. Press
~
to return to normal
play mode.
o
Set [Audio Output] to [HOMI] (page 51).
• Check that the speaker and components are connected correctly and securely.
o
Check the speaker connections and settings (pages 18,46).
•
59
US