Step 2: Connectingthe System - Sony BDV-HZ970W Operating Instructions Manual

Step 2: Connectingthe System
For connecting the system, read the intBrmation on the following pages.
Do not connect the AC power cord (mains lead) of the unit to a wall outlet (mains) until all the other
connections are lilade.
m
• When you connect another component with a volume control, turn down the volume of the other components to a
level where sound is not distorted.
The connector of the speaker cords and the color tube are color-coded depending on the type of speaker.
Connect the speaker cords to match the color of the SPEAKERS jacks of the unit.
Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with
the color tube to (_, and the speaker cord without the color tube to G. Do not catch the speaker cord
insulation (rubber covering) in the speaker terminals.
To connect speaker cords to the unit and surround amplifier
When connecting to the unit and surround amplifier, insert the connector until it clicks.
Rear panel of the unit
White
(Front left speaker (L))
Rear panel of the surround amplifier
G ray
(Surround right speaker (R))
l
Red
(Front right
speaker (R))
Green
Purple
(Subwoofer)
Blue
(Surround left speaker (L))
21 us