Table of Contents
Advertisement
SONY;;
Quick Setup Guide
BDV-F7
02010 Sony Corporation Printed in Malaysia
11"1111111~llllllmllll[lmllnlilll~111II
" 4 1 8 4 7 2 5 1 1 "
4-184-725-11 (11
1
Prepare the speakers
2
Connect your TV and set-top box
1. Connect the subwoofer speaker cord to the subwoofer.
Bottom of the subwoofer
2. Thread the subwoofer speaker cord through the gap along the
side of the subwoofer, and secure
it
in the speaker cord holder.
3. Remove the screw of the cover at the rear of the front speaker,
and then remove the cover.
4. Connect the speaker cords for the front speaker.
The connector of the speaker cord is color-coded to the speaker channel. Connect
the connector of the speaker cord to match the color of the speaker jack.
White (Front speaker (Ll)
-
o
~
Red {Front speaker (R))
5. Guide the speaker cords through the square notch at the
bottom of the cover, and then reattach the cover to the
speaker and secure it with the screw removed in Step 3.
6. Connect the speaker cords to match the color of the SPEAKERS
jacks of the unit.
Red (Front speaker (R))
While
(Front speaker
(L»)
Depending on the jacks on your TV or set-top box, select the video and audio
connection method.
1. Hold the panel cover at
(0),
then slide it out to the side.
2. Connect the video to your TV.
You can enjoy high-quality picture via the system by using an HOMI cable.
HDMI cable-
-Not supplied
3. Connect the audio from your set-top box.
If you do not use a seHop box, refer to "Connecting the TV (Audio
connection)" in the Operating Instructions. You can enjoy high-quality
sound via the system by using a digital optical cord.
""'~e:::::''::::-
"---=='"-J
Digital optical cord-
-Not supplied
A. Bring together the cables, thread them through the gap on the
bottom of the unit, and then draw them around the rear
support
{OJ.
Advertisement
Table of Contents
