Table of Contents
Advertisement
FM wire antenna (aerial)
To close the hatch
To open the hatch
28
US
em
• Be sure to fully extend the FM wire antenna (aerial).
• After attaching the panel cover, keep the FM wire antenna (aerial) as horizontal as possible.
5
Attach the panel cover to the rear of the unit.
Put the corner of the panel cover on
(8),
then slide it inward until it clicks into place.
Thread the FM wire antenna (aerial) through the small indentation of the panel cover.
To open the hatch of the panel cover
If you connect a USB device (such as a USB memory) that has a long body to the side panel, open the
hatch of the panel cover before you attach the panel cover. Be sure not to lose the hatch.
To open the hatch, remove the panel cover, hold the hatch, and then pull it up and outward.
To close the hatch, align the projection ofthe hatch with the projection opening on the panel cover, and
then gently push in and down on the hatch until it clicks.
Advertisement
Table of Contents
