Sar Information - Amplicomms PowerTel M6000 Operating Instructions Manual

Technical Properties

SAR Information

Information on radio frequency emissions and
specific absorption rates (SAR = Specific Absorption
Rate).
All the applicable safety standards related to radio
frequency emissions were implemented during the
development of this mobile phone. The limit values
are based on scientific directives and contain a
safety margin in order to guarantee the safety of all
persons regardless of age and state of health.
The values specified in the directive concerning
radio frequency emissions are based on a unit called
SAR. SAR values are established using standard
methods in which the phone is operated in all
possible frequency bands with the highest power
output.
Although the SAR values of various phone models
can differ, all the models were developed to maintain
the relevant directives on radio frequency emissions.
The following information applies to residents of
countries which, as with the European Union, have
adopted the SAR limit value recommended by the
ICNIRP (International Commission on Non−lonizing
Radiation Protection) which lies at 2W/Kg (averaged
from 10 gram tissue):
The highest SAR value measured, averaged over
10 g tissue, was < 0.422 W/kg for this mobile phone
measured at the ear.
103
Service−Hotline: 0844 800 6503 (Using an UK landline, at the time of going to print:
calls cost 6p for connection charge and then 5p a minute. Mobile costs may vary.)