Battery Status Warning - Amplicomms PowerTel M6000 Operating Instructions Manual

Charging via the desktop charging unit
4
Plug the power adapter plug
in the mini USB charging
socket on the charging unit.
Insert the phone in the
charging unit to charge it.
When the phone is switched off there is a different
view in the display − the charge icon is shown
pumping with the red LED.

Battery status warning

The current battery charge status is indicated in the
display as follows:
Full
Service−Hotline: 0844 800 6503 (Using an UK landline, at the time of going to print:
calls cost 6p for connection charge and then 5p a minute. Mobile costs may vary.)
The display will go blank but even so the
battery is still being charged. This is correct
operation.
It may take a few seconds before the phone
indicates the charging process.
You can use the phone during the charging
process.
Half empty
Quick Start Guide
5
Low Empty
9