Assembling Your 352 Icing Station - Lionel 352 Icing Station Owner's Manual

Assembling your 352 Icing Station

S et up this action-packed accessory! Follow these steps and refer to Figure 1 as you assem-
ble your Icing Station.
1. Attach the lower chute. Insert the large tab into the slot on the top plat-
form, then insert the two bottom hooks into the two slots on the lower
platform.
Four ice cubes are glued to the lower chute to give the illusion of ice sliding down to the
loading dock.
2. Attach the upper chute by squeezing the chute just below the two pivot pins,
then inserting the chute into the slots on the side of the depot building.
The bottom of the upper chute rests on the top of the lower chute.
3. Assemble and attach the depot attendant figure.
Insert the figure's arms into its body so that the shovel is positioned on the front side of the
body. Press the figure onto the metal tab that travels in the slot on the top platform.
Upper chute
Lower chute
Figure 1. Icing Station assembly
3
Ice block loading lever
Depot
attendant