Advertisement
Assembling your Lighted Freight Station
1. Fit the frosted plastic window inserts into the window openings before you
insert the doors and window frames.
Refer to Figure 1 to determine which inserts are matched with which frames and doors.
Figure 3 indicates where the doors and windows are to be placed. Install the window inserts
at those locations first.
2. Carefully snap each door and window into place over the frosted window
inserts.
Refer to Figure 3 for examples of door and window placement. Use the size of the opening
to determine the type of door or window that belongs there.
3. Insert the two hooks at the back of the bench into the two slots in the wall
and place the pointed legs into the slots in the floor.
4. Press the chimney into the roof opening as shown in Figure 3.
Figure 3. Assembling the Lighted Freight Station
5
Wide Door
with two tabs
Wide Door
with four tabs
Advertisement
